Rule-Mate 12v Control Switch Panel - Deluxe

12 volt Rocker Switch 3 Way Control


All versions of the Rule-Mate fully automatic submersible bilge pumps offer a more compact size with high performance & reliability. The RULE brand builds on more than 50 years of operational experience, innovation, design excellence & application expertise to offer modern solutions to todays boat owners and boatbuilders.

The Rule-Mate Automatic bilge pumps are packed with many improved and additional features that are not available in other brands of bilge pumps.
More compact size - only 2/3 the size of the previous versions
Auto-sense intelligence fully automatic water level sensing
Fully automatic pump in 1 common compact housing
Pump and sensor are internally common wired for easy installation
No battery drain other than when the pump is in use
500, 800 & 1100 GPH models in both 12v & 24v versions
Optimised impeller design gives up to 10% higher fl ow than previous versions - at the same amperage
Built-in thermal cut-out (TCO) to protect the pump & the vessel
Supplied with back fl ow prevention - check valve in outlet port
Anti-Airlock design has hidden air vents in the pump body
Safety back-up operating mode prevents continuous running if the sensor or impeller is fouled by debris
Pump check feature - touch and hold for 5 seconds on the "touch here" button on the pump casing - to instantly check the operation of the pump
The Rule-Mate bilge pumps operate using an internal water level sensor. When the bilge water level reaches 62mm height the pump will automatically activate, removing water from the bilge.

When the water level goes down to 16mm height the pump will automatically shut off until the water level rises again. Hidden air vents in the body of the pump helps prevent air locking in challenging plumbing installations. A check valve is included in the discharge nozzle to prevent water running back into the bilge.

The smaller footprint of the NEW Rule-Mate pumps (only 2/3 the size of the previous versions) allows mounting in tighter spaces.
Threaded discharge nozzle for easier installation and maintenance
Removable strainer to access impeller area to clear any debris
A 3rd wire allows for manual over-ride using a Rule switch panel (see below - RWB23 or 107 12volt, RWB24 or 5188 24volt)
Attractive colour retail clam packaging
3 year limited warranty
500, 800 & 1100 GPH models in both 12v & 24v versions
All pumps are the same physical size - 73mm depth x 112mm Height. The length is 129mm to the end of the threaded discharge nozzle and totals 165mm including the screw-on hose port. The actual snap-in strainer mounting base footprint is 64mm x 57mm with a slightly oval shape.